Application
This unit describes a participant’s skills and knowledge required to conduct rigid haul truck operations in Civil construction, Coal and Metalliferous mining and Extractive.
This unit is appropriate for those who work in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Elements and Performance Criteria
1. Plan and prepare for rigid haul truck operations | 1.1 Access, interpret and apply conducting rigid haul truck operations documentation and ensure the work activity is compliant 1.2 Obtain, read, interpret, clarify and confirm work requirements 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures 1.4 Select and wear personal protective equipment appropriate for the work activities 1.5 Access, interpret and apply required geological and survey data 1.6 Inspect and prepare work area in coordination with others 1.7 Resolve coordination requirements with others at the site prior to commencing, during and on completions of work activities |
2. Operate rigid haul truck | 2.1 Isolate vehicle and carry out pre-start checks including a walk around the vehicle and inspection of the body and tyres and report any issues identified 2.2 Enter and exit the vehicle using a three points of contact technique 2.3 Conduct start-up procedures, then start up the vehicle 2.4 Select and modify the operating/drive technique to appropriately meet changing work conditions 2.5 Drive, manoeuvre, conduct and control operations within the vehicle limitations 2.6 Act on or report monitoring systems and alarms 2.7 Continually monitor hazards and risks, and ensure safety to self, others, plant and equipment 2.8 Conduct park-up and shutdown procedures |
3. Load, haul and dump materials | 3.1 Position rigid haul truck under loading equipment and load vehicle 3.2 Carry out approved haulage operations 3.3 Carry out approved dumping operations 3.4 Complete load, haul and dump work activity |
4. Carry out rigid haul truck post-operational procedures | 4.1 Prepare vehicle for maintenance 4.2 Conduct inspection and fault finding 4.3 Carry out scheduled maintenance tasks 4.4 Refuel vehicle 4.5 Return vehicle to service 4.6 Process written maintenance records |
Evidence of Performance
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant documentation, policies and procedures
works effectively with others to undertake and complete the conduct of rigid haul trucks that meets all of the required outcomes including:
using a range of communications techniques and equipment to convey information to others
coordinates activities with others
working safely around other machines and personnel
demonstrates completion of conducting rigid haul truck operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
driving and manoeuvring rigid haul vehicle smoothly, adjusting operation techniques for the work environment and changing work conditions
operating rigid haul vehicle within limitations
correctly positioning the rigid haul vehicle for loading of materials under at least one (1) of the following types of loading equipment:
shovels
wheel loaders
excavators
bins
conveyor belts
draglines
hauling materials to designated location/s i.e. Tip Head, Crusher pocket, Waste Dump etc
correctly positioning the vehicle for dumping of materials
unloading materials from the rear of the vehicle in designated location and limiting spillage
undertaking approved vehicle shutdown and refuelling procedures
identifying issues with vehicle equipment and makes minor adjustments
Evidence of Knowledge
The candidate must demonstrate knowledge of the following when conducting rigid haul truck operations:
equipment safety requirements
equipment operating, maintenance and cleaning requirements and procedures
vehicle refueling procedures
complying with operational system
start-up and shutdown procedures
hauling procedures
loading procedures
changing work conditions
systems and alarms
Assessment Conditions
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing: and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years | |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. | |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Sectors
Civil construction
Coal mining
Extractive
Metalliferous mining