The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Confirm job specifications
|
|
Job requirements are read and interpreted from job documentation or production control system Completed |
Evidence:
|
Set-up is carried out correctly in minimum time with minimum wastage and availability of all job related components is checked Completed |
Evidence:
|
Set up reel system
|
|
Unwind and rewind reels are set up and adjusted according to job specifications Completed |
Evidence:
|
Webbing procedures are carried out and web-control system is set up and adjusted according to job specifications Completed |
Evidence:
|
Reels are spliced/joined according to job specifications Completed |
Evidence:
|
Printed web viewing devices are set up and adjusted according to job specifications Completed |
Evidence:
|
Folder and sheets are set up and adjusted according to job specifications Completed |
Evidence:
|
Set off/marking prevention devices are set up and adjusted according to job specifications Completed |
Evidence:
|
Set up sheet transportation system on sheet-fed machine
|
|
Feeder and delivery sections are set up and adjusted according to job specifications Completed |
Evidence:
|
Sheet pick-up and transportation systems are set up and adjusted according to job specifications Completed |
Evidence:
|
Transfer and control systems are set up and adjusted according to job specifications Completed |
Evidence:
|
Set-off/marking prevention devices are set up and adjusted according to job specifications Completed |
Evidence:
|
Substrate is added to and removed from process according to job instructions Completed |
Evidence:
|
Select and prepare inks and additives
|
|
Quality and suitability of inks, dyes or additives are selected according to job specifications and end-user requirements Completed |
Evidence:
|
Quality and suitability of inks, dyes or additives are checked and appropriate action is taken Completed |
Evidence:
|
Inks, dyes and additives are prepared according to occupational health and safety (OHS) requirements, and manufacturer's/supplier's instructions with suitable precautions to minimise waste Completed |
Evidence:
|
Correct colour and weight/volume of ink are mixed and prepared to match the requirements of the printing process and job specifications Completed |
Evidence:
|
Formulation of the ink, colour match and the approved colour are appropriately recorded Completed |
Evidence:
|
Inks, dyes and additives are appropriately labelled, handled and stored according to manufacturer's/supplier's instructions to prevent damage and hazards to personnel and to prolong shelf life Completed |
Evidence:
|
Select and prepare embellishment dyes
|
|
Quality and suitability of dies are selected according to job specifications and end user requirements Completed |
Evidence:
|
Dyes are prepared according to OHS requirements, manufacturer's/supplier's instructions with suitable precautions to minimise waste Completed |
Evidence:
|
Dyes are appropriately labelled, handled and stored according to manufacturer's/suppliers instructions to prevent damage and hazards to personnel and to prolong shelf life Completed |
Evidence:
|
Impression is set up and adjusted according to job specifications (platen and rotary) Completed |
Evidence:
|
Inking system is set up and adjusted according to the relief process and job specifications (platen and rotary) Completed |
Evidence:
|
Drying system is set up and adjusted according to job specifications Completed |
Evidence:
|
Set up machine for basic relief printing
|
|
Appropriate relief plates are selected and secured to the machine Completed |
Evidence:
|
Relief plates or formes or cylinders are positioned and set up and adjusted according to job specifications (platen and rotary) Completed |
Evidence:
|
Impression is set up and adjusted according to job specifications (platen and rotary) Completed |
Evidence:
|
Inking system is set up and adjusted according to relief process and job specifications (platen and rotary) Completed |
Evidence:
|
Drying system is set up and adjusted according to job specifications Completed |
Evidence:
|
Set up machine for basic embellishment
|
|
Appropriate dyes are selected and secured to the machine Completed |
Evidence:
|
Dyes are positioned and set up and adjusted according to job specifications (platen and rotary) Completed |
Evidence:
|
Impression is set up and adjusted according to job specifications (platen and rotary) Completed |
Evidence:
|
Conduct proof run
|
|
Material to be used for proof is organised correctly Completed |
Evidence:
|
Machine is operated according to manufacturer's and enterprise producers to produce specified proof Completed |
Evidence:
|
Proof is visually inspected and/or tested or laboratory testing organised according to enterprise procedures Completed |
Evidence:
|
Client approval or authority is sought prior to production run where appropriate. Completed |
Evidence:
|
Results are interpreted and adjustment changes are carried out according to product and machine specifications to determine adjustment requirements Completed |
Evidence:
|