ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Select approach and determine applicable minima

1.1

Current instrument approach and landing (IAL) chart for GNSS/NPA approach to be flown is selected

1.2

Entry to and conduct of instrument approach and missed approach procedure are reviewed and briefed to flight crew

1.3

Currency of GNSS receiver database is confirmed

1.4

Applicable meteorological minima of approach for aircraft performance category is determined

1.5

Fuel availability and holding or diversion action if visual reference is not established, is reviewed and briefed to flight crew

2

Select, retrieve and activate approach from database

2.1

GNSS approach for appropriate runway from GNSS receiver navigation database, is selected

2.2

Initial approach fix to be used to transition approach procedure is selected

2.3

Aerodrome altimeter subscale setting to obtain elevation or altitude (QNH) in GNSS receiver is entered, and approach is activated

2.4

Confidence check of tracks and distances between approach way-point (WPT) as calculated by the GNSS receiver, is performed

2.5

Course deviation indictors (CDI) are checked and selected to GNSS as required

3

Monitor GNSS signal integrity

3.1

Receiver autonomous integrity monitoring (RAIM) is checked for availability on the approach

3.2

RAIM indications are monitored throughout the approach

4

Conduct initial approach

4.1

Altimeter is set to appropriate QNH

4.2

Track to initial approach WPT is maintained at or above route minimum safe altitude (MSA) or lowest safe altitude (LSALT)

5

Conduct holding pattern

5.1

Automatic sequencing of GNSS is suspended

5.2

Published holding pattern is conducted at appropriate initial approach WPT using prescribed sector entry procedure

5.3

Automatic sequencing is resumed to continue approach

6

Conduct approach procedure

6.1

GNSS/NPA instrument approach is conducted while descending on specified track to each approach WPT

6.2

Approach altitude restrictions are complied with

6.3

GNSS receiver transitions to approach mode is confirmed no later than the final approach point (FAP), WPT or discontinue approach

6.4

Secondary navigation aid is utilised to maintain situational awareness

6.5

Descent to not below the minimum descent altitude (MDA) while tracking to the missed approach point, is conducted within tolerances

6.6

Landing runway is identified

6.7

Runway or circling approach for landing is conducted after visual reference is established

7

Conduct missed approach procedure

7.1

Conditions requiring a missed approach are recognised and missed approach is initiated

7.2

Published missed approach procedure is executed if visual reference is not established before reaching the MAPt or RAIM

7.3

Missed approached is conducted on any other event specified in aeronautical information publication (AIP) or GNSS operations manual

7.4

Aircraft is manoeuvred to MAPt

7.5

Missed approach mode is selected

7.6

Missed approach procedure is conducted in accordance with IAL chart

7.7

GNSS receiver is configured to conduct another approach or to hold or divert as required

7.8

Obstacle clearance in instrument meteorological conditions (IMC) is maintained