Change log for PMC10
PMC10 unit update log
- PSPPM502B
- Manage complex projects, updated 2016-01-22
- PSPPM402B
- Manage simple projects, updated 2016-01-22
- PMC557096A
- Specify and monitor the installation of block_precast refractories, updated 2013-10-24
- PMC557093A
- Design a refractory_ceramic component, updated 2013-10-24
- PMC556031C
- Design structural_mechanical components, updated 2013-10-24
- PMC552091B
- Prepare for, install and repair refractory brickwork_blockwork, updated 2013-10-24
- MSAPMSUP382A
- Provide coaching_mentoring in the workplace, updated 2013-10-24
- MSAPMOPS400A
- Optimise process_plant area, updated 2013-10-24
- PMC552005C
- Process greenware_green products, updated 2013-10-24
- PMC552002C
- Operate equipment to blend_mix materials, updated 2013-10-24
- PMC552056B
- Assemble, fabricate and place reinforcement, updated 2013-09-29
- MSACMT260A
- Use planning software systems in manufacturing, updated 2013-09-29
- PMC552008B
- Operate crushing equipment, updated 2013-09-29
- PMC563081C
- Carry out stock control, updated 2013-09-29
- PMC552071B
- Operate wet and dry end equipment, updated 2013-09-29
- MSAENV472A
- Implement and monitor environmentally sustainable work practices, updated 2013-09-29
- PMC555031B
- Choose materials for an application, updated 2013-09-29
- PMC552046C
- Operate glass printing equipment, updated 2013-09-29
- PMC557094A
- Investigate refractory failures, updated 2013-09-29
- MSAPMPER400A
- Coordinate permit process, updated 2013-09-29
- PMC552042C
- Operate blown insulation equipment, updated 2013-09-29
- MSACMT430A
- Improve cost factors in work practices, updated 2013-09-29
- PMC553042C
- Set up and optimise secondary process, updated 2013-09-29
- PMAOPS105C
- Select and prepare materials, updated 2013-09-29
- MSAPMOHS200A
- Work safely, updated 2013-09-29
- PMASUP420B
- Minimise environmental impact of process, updated 2013-09-29
- MSACMC611A
- Manage people relationships, updated 2013-09-29
- PMC557092A
- Specify and interpret refractory tests, updated 2013-09-29
- MSAPMOHS510A
- Manage risk, updated 2013-09-29
- MSL952001A
- Collect routine site samples, updated 2013-09-29
- TLIC407D
- Drive heavy rigid vehicle, updated 2013-09-29
- PMC552043C
- Operate float forming equipment, updated 2013-09-29
- PMC552050C
- Schedule, cut and bend reinforcement, updated 2013-09-29
- MSAPMSUP100A
- Apply workplace procedures, updated 2013-09-29
- MSAPMSUP330A
- Develop and adjust a production schedule, updated 2013-09-29
- TLID1007C
- Operate a forklift, updated 2013-09-29
- MSAPMOHS401A
- Assess risk, updated 2013-09-29
- PMC553020C
- Prepare moulds and dies, updated 2013-09-29
- PMC552047C
- Operate primary annealing equipment, updated 2013-09-29
- MSACMT460A
- Facilitate the use of planning software systems in manufacturing, updated 2013-09-29
- MSAPMOHS300A
- Facilitate the implementation of OHS for a work group, updated 2013-09-29
- MSAPMPER201A
- Monitor and control work permits, updated 2013-09-29
- MSL974005A
- Perform physical tests, updated 2013-09-29
- MSAPMSUP200A
- Achieve work outcomes, updated 2013-09-29
- PMC552045C
- Operate container forming equipment, updated 2013-09-29
- PMC555030C
- Analyse equipment performance, updated 2013-09-29
- MSAPMSUP280A
- Manage conflict at work, updated 2013-09-29
- PMC552007B
- Heat accelerate the curing of precast concrete, updated 2013-09-29
- PMAOPS512B
- Determine mass transfer loads, updated 2013-09-29
- MSACMT482A
- Assist in implementing a proactive maintenance strategy, updated 2013-09-29
- MSACMT452A
- Apply statistics to processes in manufacturing, updated 2013-09-29
- MSAPMOPS101A
- Make measurements, updated 2013-09-29
- PMAOPS500A
- Optimise production systems, updated 2013-09-29
- MSACMC413A
- Lead team culture improvement, updated 2013-09-29
- MSL973001A
- Perform basic tests, updated 2013-09-29
- PMC552022C
- Prepare materials for clay and ceramic production, updated 2013-09-29
- MSAPMOHS110A
- Follow emergency response procedures, updated 2013-09-29
- PMAOPS101C
- Read dials and indicators, updated 2013-09-29
- MSACMT450A
- Undertake process capability improvements, updated 2013-09-29
- MSACMT240A
- Apply 5S procedures in a manufacturing environment, updated 2013-09-29
- PMC552058B
- Demould concrete products, updated 2013-09-29
- PMAOPS601A
- Debottleneck plant, updated 2013-09-29
- PMC561080B
- Organise self, updated 2013-09-29
- PMAOPS402A
- Respond to abnormal process situations, updated 2013-09-29
- TAAASS404B
- Participate in assessment validation, updated 2013-09-29
- PMC552052C
- Cast moulded concrete products, updated 2013-09-29
- MSAPMOPS212A
- Use organisation computers or data systems, updated 2013-09-29
- PMC552030C
- Operate a firing kiln, updated 2013-09-29
- PMC552049C
- Operate on-line stacking and assembly equipment, updated 2013-09-29
- PMC552040C
- Operate glass melting process, updated 2013-09-29
- MSACMG702A
- Review manufacturing practice tools and techniques, updated 2013-09-29
- PMC552051C
- Finish green concrete products, updated 2013-09-29
- PMAOPS505A
- Control the process during abnormal situations, updated 2013-09-29
- MNMC205A
- Conduct local risk assessment, updated 2013-09-29
- MSACMT670A
- Develop and manage sustainable energy practices, updated 2013-09-29
- PMC552031C
- Operate extrusion equipment, updated 2013-09-29
- MSAPMPER200B
- Work in accordance with an issued permit, updated 2013-09-29
- PMC562083C
- Allocate and complete team tasks, updated 2013-09-29
- MSACMT640A
- Manage 5S system in a manufacturing environment, updated 2013-09-29
- PMC552020C
- Operate slip casting equipment, updated 2013-09-29
- PMBHAN103C
- Shift materials safely by hand, updated 2013-09-29
- PMC557091A
- Design a refractory lining, updated 2013-09-29
- TAAASS403B
- Develop assessment tools, updated 2013-09-29
- PMC552093B
- Prepare for and cast refractory materials, updated 2013-09-29
- MSACMT661A
- Determine and establish information collection requirements and processes, updated 2013-09-29
- TAAASS402C
- Assess competence, updated 2013-09-29
- MSACMT250A
- Monitor process capability, updated 2013-09-29
- PMC557098A
- Specify refractory installation systems, updated 2013-09-29
- MSAPMOPS405A
- Identify problems in fluid power system, updated 2013-09-29
- MSACMT681A
- Develop a proactive maintenance strategy, updated 2013-09-29
- MSACMT671A
- Develop and manage sustainable environmental practices, updated 2013-09-29
- PMC552032C
- Operate pressing equipment, updated 2013-09-29
- MSAPMOPS401A
- Trial new process or product, updated 2013-09-29
- PMC552095B
- Prepare for, install and repair ceramic fibre, updated 2013-09-29
- PMC553051B
- Produce structural precast concrete, updated 2013-09-29
- TAAASS301B
- Contribute to assessment, updated 2013-09-29
- MSAPMSUP310A
- Contribute to the development of plant documentation, updated 2013-09-29
- PMC553080B
- Set up and optimise finishing process, updated 2013-09-29
- PMC553040C
- Set up and optimise glass forming process, updated 2013-09-29
- PMC557097A
- Specify and monitor repairs to refractory installations, updated 2013-09-29
- PMC552003C
- Operate grinding equipment, updated 2013-09-29
- PMC553010C
- Process raw meal into product, updated 2013-09-29
- MSAPMSUP106A
- Work in a team, updated 2013-09-29
- PMAOPS501A
- Provide operational expertise to a project team, updated 2013-09-29
- PMC552094B
- Prepare for and apply shotcrete for installation, updated 2013-09-29
- MSACMT251A
- Apply quality standards, updated 2013-09-29
- MSAPMPER205B
- Enter confined space, updated 2013-09-29
- PMC552070B
- Operate forming equipment, updated 2013-09-29
- PMBTECH502B
- Review and analyse production trials and specify retrials, updated 2013-09-29
- MSACMC411A
- Lead a competitive manufacturing team, updated 2013-09-29
- MSAPMOHS503A
- Maintain the workplace OHS management system, updated 2013-09-29
- MSAPMOPS200A
- Operate equipment, updated 2013-09-29
- PMC554090B
- Undertake simple refractory design, updated 2013-09-29
- PMC552023C
- Finish products after firing, updated 2013-09-29
- PMC552041C
- Operate process ovens, updated 2013-09-29
- PMC562070B
- Move materials, updated 2013-09-29
- MSAPMSUP230A
- Monitor process operations, updated 2013-09-29
- MSAPMSUP240A
- Undertake minor maintenance, updated 2013-09-29
- MSACMT660A
- Develop the application of enterprise systems in manufacturing, updated 2013-09-29
- MSAPMSUP201A
- Receive or despatch goods, updated 2013-09-29
- PMC552072B
- Produce fibrous plasterboard, updated 2013-09-29
- PMAOPS522A
- Coordinate plant shut down, updated 2013-09-29
- PMC552044C
- Operate fibre forming equipment, updated 2013-09-29
- MSL916005A
- Manage complex projects, updated 2013-09-29
- MSAPMSUP292A
- Sample and test materials and product, updated 2013-09-29
- PMC552004C
- Prepare for production, updated 2013-09-29
- MSACMS401A
- Ensure process improvements are sustained, updated 2013-09-29
- MSAENV672A
- Develop workplace policy and procedures for sustainability, updated 2013-09-29
- PMC554020D
- Design and prepare models, moulds and dies, updated 2013-09-29
- PMC552053C
- Finish cured concrete products, updated 2013-09-29
- TAAASS401C
- Plan and organise assessment, updated 2013-09-29
- PMC552092B
- Prepare for and install mouldable refractory materials, updated 2013-09-29
- MSACMG700A
- Review continuous improvement processes, updated 2013-09-29
- MSACMG712A
- Lead a problem solving process to determine and solve root cause, updated 2013-09-29
- PMC553000C
- Set up and tune a process, updated 2013-09-29
- PMC553021C
- Set up and tune glazing equipment, updated 2013-09-29
- MSAPMSUP390A
- Use structured problem solving tools, updated 2013-09-29
- PMC562081B
- Deliver customer service, updated 2013-09-29
- PMC562071C
- Operate bulk materials handling equipment, updated 2013-09-29
- MSACMT650A
- Determine and improve process capability, updated 2013-09-29
- LMTGN5004A
- Manage installation and commissioning of equipment and systems, updated 2013-09-29
- MSAPMPER202A
- Observe permit work, updated 2013-09-29
- MSACMT271A
- Use sustainable environmental practices, updated 2013-09-29
- PMAOPS511B
- Determine energy transfer loads, updated 2013-09-29
- MSACMT641A
- Implement a continuous improvement system, updated 2013-09-29
- MSAPMSUP300A
- Identify and implement opportunities to maximise production efficiencies, updated 2013-09-29
- MEM09002B
- Interpret technical drawing, updated 2013-09-29
- MSAPMSUP102A
- Communicate in the workplace, updated 2013-09-29
- PMC557090A
- Select refractory materials for an application, updated 2013-09-29
- MSAPMOHS400A
- Contribute to OHS management system, updated 2013-09-29
- MSACMT230A
- Apply cost factors to work practices, updated 2013-09-29
- PMAOPS405A
- Operate complex control systems, updated 2013-09-29
- PMC552055C
- Conduct benching operations, updated 2013-09-29
- MSACMT280A
- Undertake root cause analysis, updated 2013-09-29
- MSAPMOPS406A
- Identify problems in electronic control systems, updated 2013-09-29
- PMC552010C
- Operate a calcining kiln, updated 2013-09-29
- PMC554091B
- Analyse refractory failures, updated 2013-09-29
- MEM09003B
- Prepare basic engineering drawing, updated 2013-09-29
- MSACMC612A
- Manage workplace learning, updated 2013-09-29
- MSAPMSUP303A
- Identify equipment faults, updated 2013-09-29
- PMC552024C
- Hand mould products, updated 2013-09-29
- PMC557095A
- Specify and monitor the installation of monolithic/castable refractories, updated 2013-09-29
- PMC553072B
- Model fibrous plaster products, updated 2013-09-29
- MSACMC610A
- Manage relationships with non-customer external organisations, updated 2013-09-29
- MSAPMOPS404A
- Co-ordinate maintenance, updated 2013-09-29
- PMC552090B
- Use and maintain tools and equipment for refractory operations, updated 2013-09-29
- PMC553050C
- Produce architectural precast concrete, updated 2013-09-29
- PMC552006C
- Operate an autoclave, updated 2013-09-29
- MSACMT270A
- Use sustainable energy practices, updated 2013-09-29
- PMC561072C
- Store materials for production, updated 2013-09-29
- PMAOPS216B
- Operate local control system, updated 2013-09-29
- MSAPMSUP101A
- Clean workplace or equipment, updated 2013-09-29
- PMAOPS305B
- Operate process control systems, updated 2013-09-29
- MSACMT231A
- Interpret product costs in terms of customer requirements, updated 2013-09-29
- PMC552065B
- Prepare asphalt, updated 2013-09-29
- PMC552048C
- Operate glass finishing equipment, updated 2013-09-29
- PMC553041C
- Set up and optimise glass furnace process, updated 2013-09-29
- PMAOPS521C
- Plan plant shutdown, updated 2013-09-29
- PMC552057B
- Finish casting operation, updated 2013-09-29
- MSACMT441A
- Facilitate continuous improvement in manufacturing, updated 2013-09-29
- PMC553070B
- Design and construct moulds for fibrous plaster products, updated 2013-09-29
- PMASUP520B
- Review procedures to minimise environmental impact of process, updated 2013-09-29
- MSACMT481A
- Undertake proactive maintenance analyses, updated 2013-09-29
- MSAENV272A
- Participate in environmentally sustainable work practices, updated 2013-09-29
- TLIC307C
- Drive medium rigid vehicle, updated 2013-09-29
- MSACMT451A
- Mistake proof a production process, updated 2013-09-29
- MSAPMOPS100A
- Use equipment, updated 2013-09-29
- MSACMT675A
- Facilitate the development of a new product, updated 2013-09-29
- MSACMT281A
- Contribute to the application of a proactive maintenance strategy, updated 2013-09-29
- PMC557001A
- Manage trials, updated 2013-09-29
- PMC552054C
- Spin concrete pipes, updated 2013-09-29
- TAADEL301C
- Provide training through instruction and demonstration of work skills, updated 2013-09-29
- PMC552061C
- Deliver concrete to site, updated 2013-09-29
- PMC562075B
- Maintain kiln refractory, updated 2013-09-29
- MSAPMSUP210A
- Process and record information, updated 2013-09-29
- PMC552060C
- Batch mix concrete, updated 2013-09-29
- MSACMT440A
- Lead 5S in a manufacturing environment, updated 2013-09-29
- PMAOPS520C
- Manage utilities, updated 2013-09-29
- PMAOPS600C
- Modify plant, updated 2013-09-29
- PMC552021C
- Operate manual glazing equipment, updated 2013-09-29
- MSACMG707A
- Respond to a major non-conformance, updated 2013-09-29